Jokisch - Other Products

SR-X1 - System Cleaner Concentrate

Jokisch SR-X1 System Cleaner concentrate has been developed to provide a bacterial and fungus free machine before filling with a Jokisch water-soluble product. The system cleaner will also remove the build up of old coolant and guarantee a truly clean machine. This product is safe and very effective if the following steps are followed.

1. When handling SR-X1, please wear protective clothing, which includes rubber gloves and safety glasses as the product in concentrate is corrosive.
2. Mix SR-X1 System Cleaner at 1% into the existing coolant. It is important not to exceed the 1-% concentration. This translates into one (1) pint (17-fl oz.) for every 15 gallons (50 liters) of mixed coolant. For a 30-gallon tank reservoir, two (2) pints are needed.
3. Let machine run with old coolant and SR-X1 for at least eight (8) hours.
4. Dispose of old coolant with added system cleaner.
5. Rinse machine with water to remove any residuals. This is very important as remaining SR-X1 will cause any fresh batch of coolant to instantly separate.
6. Fill machine with fresh Jokisch coolant.

If there are any questions, please do not hesitate to contact your distributor or Intercon Enterprises Inc.

Z-22 - Disinfectant and Machine Cleaner Concentrate

Z-22 eliminates and loosens built-up bacteria very effectively. It should be used before adding any Jokisch coolant to guarantee a long coolant life. Z-22 is also a cleaner and stabilizer. It kills bacteria (yeast and fungus) caused by non-Jokisch products.

The mix ratio is 1:15; then let circulate for a minimum of 5 hours, preferably 12 hrs, if possible.

Available packaging: 500mL/17oz, 4L/1gal and 20L/5gal

Inter-Lube 68 - Specially Formulated Machine Tool Way Lubricant

Recommended for use with all Jokisch coolants; Anti "stick-slip" properties provide chatter-free travel of machine ways, guides and slides on CNC and general machine tools under sparse or flood lubrication. Meets demands of heavily loaded ways on lathes, milling machines, grinders and other equipment.

Inter-Lube 68 has a strong adherence to ways, with rust inhibiting components and EP properties which are a definite asset to machinery. Its most outstanding attribute is its extremely good rejection (non-binding) properites to Jokisch coolant. This allows easy removal of the oil from the coolant by a skimming wheel, "tramp-free" pad, or vacuum. Coolant life and stability are enhanced because of its non-contaminate properties.

Available packaging: 20L/5gal and 205L/55gal

4 Hour Glove - A Spray-On Foam Hand and Skin Protector

Hand protecting foam - clinically tested. Protects hands exposed to industrial materials such as solvents, alkais, cleaning products, oils, greases, metals and extended contact with water based solutions like cutting and grinding fluids.

The 4 hour glove is shown to protect hands from swelling and prevents "drying" while stopping dirt and grime from embedding in the skin. (The best protection is given when rubbed underneath and around fingernails.) Suited to applications where gloves are undesirable or cannot be used.

Re-apply every 4 hours and shake well before using. Non-toxic and user-friendly. Average application: a marble-sized quantity. Contains no ozone depleting chemicals.

Available packaging: 150mL/5.1oz (yields approximately 650 uses per can).