Products
InterPurge
Baer Hardware
Jokisch Fluids
Water Soluble Coolants
Tapping & Cutting Oils
Anti-Spatter
MSDS Downloads
Tigrip
Hardy Tools
Tectus
 
MSDS Downloads
What’s New
About Us
Contact Us
Literature Request

 

Jokisch Tapping Fluids

The following table provides a quick guide for Jokisch Tapping Fluids distributed by Intercon. A more detailed explanation of each product is given via the hyperlink. All of the tapping fluids do not contain any metal active sulphur chlorinated solvents, or ODC's.

Product Shortcuts: HDS-400 | S-91 | Econo 897 | WAC-201

Cutting/Tapping Fluid Comparison Chart

Product Description/Pkg

Applications

Materials

Characteristics

Jokisch HDS-400
Tapping and Cutting Oil.
250mL/8.45oz
5L/1gal
20L/5gal
205L/55gal

Manual and machine use. Tapping, threading, cutting, drilling, reaming, drawing, etc.

Ferrous and non-ferrous: stainless steel, chrome nickel alloy, carbon and tool steel, cast iron, brass, copper, aluminum and aluminum alloys, plastic.

Medium viscosity, very safe, oil clings to taps, high lubricity, very economical, extends tool life, high threading performance, gives very close tolerance threads.

Jokisch S-91
Tapping and Cutting Oil
250mL/8.45oz
5L/1gal
20L/5gal

Manual and machine use. Tapping, threading, cutting, drilling, reaming, etc.

Ferrous and non-ferrous: stainless steel, chrome nickel alloy, carbon and tool steel, cast iron, brass, bronze, copper, aluminum and aluminum alloys, plastic.

Light viscosity, very safe, oil clings to taps, high lubricity, contains heat seeking properties, good for exotic metals, provides extended tool life, and gives very close tolerance threading performance.

Jokisch Econo 897 Tapping and Threading Paste.
250gr/8.8oz
750gr/26.9oz
5kg/11 lb

Tapping, threading, cutting, drilling, reaming, drawing, etc. Exceptional performance on hole-cut saws and roto broaches.

Ferrous and non-ferrous: stainless steel, chrome nickel alloy, carbon and tool steel, cast iron, titanium, inconel, molybdenum and alloys, aluminum and aluminum alloys.

Heavy viscosity, suitable for very small and large workpieces; the paste clings onto tap or cutter even when the workpiece turns at high rpms. Versatile and economical, applies with a brush, or can be dipped into.

Jokisch WAC-201 Cutting, Tapping, and Threading Wax Stick.
300gr/10.5oz

Sawing, threading, tapping, reaming, drilling, etc.

Aluminum and aluminum alloys. Extrusion and tubing, also suitable for mild steels.

Wax stick: developed for circular saws (high and low rpm), hack saws (manual and machine). Can be used for tapping, threading and reaming, any work which requires a heavy duty paste.