TUNGSTEN ELECTRODE GRINDER

The Intercon TiG 10/175 Grinder is an easy-to-use, dedicated precision grinding machine for tungsten electrodes. This unit has a patented electrode holder allowing easy grinding which results in a centric and longitudinal grind. Small diameter electrodes are "held" against the wheel, preventing out of round grinds. A tungsten electrode grinder is necessary to get proper arc penetration especially when using orbital welding machines.

The unit below is displayed with the optional dial indicator.

Features

• Shortening, parting and grinding is done with only one diamond wheel.
• Optimal welding and cutting results through centric and longitudinal grinding.
• Adjustible: 0-90° grinding angle.
• No waves created in the grain of the electrode during the grind process, even when grinding old electrodes.
• Excellent ignition qualilities, even after hundreds of ignitions.
• Stable welding arc with excellent weld quality, whether orbital or hand welding.
• Exact repetition of welding electrode parameters.
• For tungsten electrodes .040" - 3/16" (1.0 - 4.8 mm) in diameter and lengths of 1/2" - 6 7/8" (10 - 175mm)
• Easy to use.

Operation

The Intercon TiG 10/175 is an easy-to-use grinder due to its patented electrode holder. For complete instructions, please contact us for an instruction manual.

Spannfix Electrode Holder can be used as an alternative with a normal bench grinder

Optional Equipment: HEPA Dust Extractor and Grinder Cabinet.

Return to Welding Accessories