PRO₂ Mobil

Introduction

The Pro2-Mobil is the latest addition to our line of oxygen indicators.

Its updated design is extremely well suited to the welding industry and those types of corresponding applications. In the past, the very high quality welds that were required for the semi-conductor industry are now commonplace in aerospace, pharmaceutical, dairy, brewery and food industries, and with this unit these critical rest oxygen levels coan be accurately quantified.

The keyboard is user-friendly and allows for function display changes even with work gloves or welding gloves. Through the audible click of the operating keys, choices are confirmed. The PRO2 mobile can be programmed for a variety of functions, including audible and visual settings.

Some key features of the Pro-2 mobil

• Temperature regulated zirconium cell
• Highly accurate 1000 - 1 ppm measuring range
• Graphic display screen changes color relative to process and function
• Built in recognition for multi-voltage power sources (110V - 240V)
• Portable for remote and difficult access sites uses 1.2V 3200mAh rechargeable batteries
• Programmable sound function
• Low permeability measuring hose for accurate measurements
• Connects via RS 232 interface, Bluetooth, 0-5 VDC or AUX (AMI)
• Software updateable
• Cigarette lighter charger available
• Easy to use software
• Complete with carrying case

Design Highlights

The Pro2-mobil oxygen indicator contains a stabilized zirconium oxide cell with a regulated heater to maintain a cell temperature of 750°C which enables it to accurately measure levels from 600 ppm down to levels as low as 1 ppm.

The Pro2 mobil is ideally suited in a portable configuration, and can operate for approximately up to one hour of use before the batteries must be recharged. This is a signifigant benfit for users welding in more remote inaccessable areas where normal 110v/220v power is not available.

Return to Oxygen Indicators
Return to Welding Accessories